Master Spas H2X Manuel du propriétaire télécharger pdf (Page 23)

Do Not Dive.

SWIM SPA WATER MAINTENANCE - START-UP

DAY ONE

1. Test and adjust total alkalinity if necessary to between 80 to 120 ppm using

the pH / alkalinity increaser or decreaser 5 oz. at a time. Wait 30 minutes,

retest and adjust if necessary. The pump should be running on high speed

during this time with the air controls closed.

2. Test and adjust pH, if necessary, to within the range of 7.2 to 7.8 using the

pH / alkalinity increaser or decreaser, 2.5 oz. at a time. Wait 30 minutes,

retest and adjust if necessary. The pump should be running on high speed

during this time with the air controls closed.

3. Test and adjust sanitizer level. Add chlorine following label directions to

maintain a free chlorine level of 1 to 3 ppm. If using bromine, adjust feeder

to maintain a total bromine level of 3 to 5 ppm. Add bromine tablets to the

dispenser if necessary, following label directions.

4. Add a water clarifier following label directions. If the swim spa is equipped

with an ozone unit, we recommend adding an enzyme product in place of the

clarifier, following the label directions.

5. Use a small amount of defoamer only if necessary.

DAY TWO SKIP

DAY THREE

1. Test and adjust total alkalinity, if necessary, to between 80 and 120 ppm using

the pH / alkalinity increaser or decreaser, 5 oz. at a time. Wait 30 minutes,

retest and adjust if necessary. The pump should be running on high speed

during this time with the air controls closed.

2. Test and adjust the pH, if necessary, to within the range of 7.2 to 7.8 using

the pH / alkalinity increaser or decreaser, 2.5 oz. at a time. Wait 30 minutes,

retest and adjust if necessary. The pump should be running on high speed

during this time with the air controls closed.

3. Test and adjust sanitizer level. Add chlorine following label directions to

maintain a free chlorine level of 1 to 3 ppm. If using bromine, adjust feeder

to maintain a total bromine level of 3 to 5 ppm. Add bromine tablets to the

dispenser if necessary, following label directions.

4. Add sequestering chemical, following label directions for maintenance.

5. If necessary, clean water line with a spa general purpose cleaner or enzyme

product.

6. Use a defoamer only if necessary.

07MS H2X Owners Manual 1/10/07 11:29 PM Page 23

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 45 46

Pas de commentaire

Master Spas H2X Manuel du propriétaire Page 23