Master Spas H2X Manuel du propriétaire télécharger pdf (Page 37)

Do Not Dive.

SWIM SPA TROUBLE SHOOTING GUIDE

NOTHING ON THE SWIM SPA OPERATES-

1.) Check the control panel display for any messages. If there is a message,

refer to the diagnostic section.There you will find the meaning of the

message and what action is to be taken.

2.) If there is no message on your control panel, check and reset the GFCI

and house breaker.

If the swim spa does not respond, contact your local service company.

PUMP(S) DO NOT OPERATE -

1.) Press the

“Jets” button on your control panel.

If you hear the pumps trying to operate:

A. Check that all the slice valves are open. See photo on page 12.

B. Pump may need to be primed. See page 18.

C. Check that the air controls are open. See photo on page 10.

If you do not hear anything from the pump, contact your local service

company.

POOR JET PERFORMANCE

1.) Make sure pump is operating

2.) Check that the water level is adequate

(up to minimum safe water level side)

3.) Make sure the jets are open and the air controls are open.

See pages 9 and 10.

4.) Check for dirty filters. Clean if necessary.

*The GFCI should be located in a weather

proof box close to the swim spa, but no closer

than 5 ft.

07MS H2X Owners Manual 1/10/07 11:30 PM Page 37

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 45 46

Pas de commentaire

Master Spas H2X Manuel du propriétaire Page 37