Master Spas H2X Manuel du propriétaire télécharger pdf (Page 10)

Do Not Dive.

GLOSSARY OF SWIM SPA TERMINOLOGY

4. AIR CONTROL VALVES - These are located around the top of your swim

spa.You may increase or decrease the force of your jets by opening or closing

the air control valves.Typically, one dial controls the air to water ratio and

mix to one group of jets.When not in use the air controls should be kept in

the closed position, as air bubbles tend to cool the water.

5. TOPSIDE CONTROL PANEL -You may safely control all functions from

inside or outside your swim spa using the Topside Control Panel.This Panel is

used to control the water temperature, pumps, the spa light, automatic

filtration cycles and other advanced functions.The digital display will give you

a constant temperature readout and will notify you in case of certain

malfunctions. Several user programmable functions are also available.

6. PROPULSION SYSTEM CONTROL PANEL -You may safely control the

speed of the propulsion system from the inside of your swim spa.This panel is

used to turn the propulsion system on and off and to adjust the intensity of the

water flow.

7. PERSONAL REMOTE CONTROL -Your swim spa has an additional remote

which allows the user to control the stand up jet therapy zone. By pressing the

control one time, you will activate the pump. Press the pad again to turn the

pump off.

8. EQUIPMENT ACCESS PANEL - Located behind the side panel below the

Topside Control Panel, this area houses the major components responsible for

the swim spas operation.Those components include the pumps, heater,

control panel box, Ozonator, and LED light system (if applicable). Pump

and equipment placement may vary by model.

Air Control Valve

Personal Remote Control

07MS H2X Owners Manual 1/10/07 11:29 PM Page 10

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 45 46

Pas de commentaire

Master Spas H2X Manuel du propriétaire Page 10